How to choose aluminum?Ordinary consumers in the purchase of aluminum can be identified visually by the simplest method, coating the substrate surface gloss, no cracks, aluminum ceiling section, no black, gray, green, hair, and other impurities, you then can look at the actual thickness of the coating section, some low-grade aluminum coating thickness will be to increase the strength of the board.
perforated aluminium plate
Some consumers generally believe that the thicker plate like, the hardness of the stronger the better. Led many manufacturers in order to meet their requirements, one-sided pursuit of thickness, hardness, surface treatment spray a layer of paint or more used some iron, lead, zinc and other heavy recovery miscellaneous aluminum plate pinch, this board price low hardness, thickness can meet.This will result in a composition ratio of the alloy can not be controlled, easily oxidized products, while due to extensive use of recycled aluminum, its toxic to humans, harmful to a large number of metal components exceeded, radioactive, human cells have a greater radiation and injuries, serious harm human health. This is one reason why the price of aluminum on the market there are increasingly rising very cheap Lvkou Ban.
aluminum plate pricing
How to store aluminum?Users need to store a few days after the purchase of aluminum, and vendors will be stored longer if proper storage of aluminum in this period of time, to avoid problems caused by unreasonable because the store? Today as we talk about aluminum storage precautions.Aluminum storage Note a: try to aluminum stored in the warehouse, if the conditions were not the case even in outdoor environments need protection rain cloth, avoid the rain, moisture causes oxidation of the aluminum surface appears white.
aluminium circle supplier
Aluminum storage Note II: aluminum during transport, must be covered with a tarpaulin to prevent rain, snow intrusion. Aluminum storage environment should be dry, bright, well-ventilated, non-corrosive climate, and should prevent rain, water, snow intrusion. Aluminum during storage, the bottom must be separated from the ground by the skids, keeping the ground distance is greater than 10CM. With no chemical materials and wet materials are stored together.
Tuesday, 24 May 2016
How to choose and store aluminum
Alkaline etching process：The degreasing → washing → alkaline etching → rinsing → rinsing → light → washing → washing → oxidation, namely profiles degreasing later, in alkaline etching by alkaline etching treatment to remove the natural oxide film and mechanical pattern, sand, and then after a light tank to remove surface black and gray, can be anodized. The core of the process step is alkaline etching, surface roughness profile, sand, etc. The quality of the process by the decision. For the purpose of leveling the mechanical pattern, which normally takes 12-15 minutes alkali corrosion, aluminum consumption of 40-50Kg / T, alkali consumption of 50Kg / T. Such a high consumption of aluminum, waste of resources and serious environmental problem, increase the cost of wastewater treatment. The process has been used for over 100 years, much of the world still in use ALUMINUM, until the last two years, was gradually replaced by the etching.
aluminium plates suppliers
Etching process：Etching by a degreasing → washing → → washing → washing → alkaline etching → rinsing → rinsing → light → washing → washing → oxidation composition. After the first etching profile degreasing, after alkaline etching, a light, complete pre-treatment. The core of the process is etching step, to mechanical pattern, sand, such as by etching decision. The biggest advantage is different from the alkaline etching, etching is going strong mechanical pattern, sand, low aluminum consumption, usually 3-5 minutes to complete, alkaline etching aluminum consumption is almost 1 / 8-1 / 6 from efficiency and resource conservation perspective, the etching is undoubtedly a big step forward alkaline etching process. However, environmental issues have become more prominent etching: contaminated with toxic gases escape HF acid bath and washing trough Fˉ of. Fluorides are generally highly toxic, processing more difficult. In addition, the etching process, profiles the appearance of dark black hair, despite the forced continuation of alkaline etching and the light brightens, but still very dark, not only increasing the process has lost its luster, these problems have not yet valid solution.
Polishing process：The degreasing → washing → polishing → washing → washing composition profiles by polishing into the groove after degreasing, 2-5 minutes after polishing, the mirror can be formed, after washing with water can be directly oxidized. The core of the process step is polishing, Wrinkle, mirror polishing is done in the groove. Polished aluminum consumption has a low profile bright advantages, but polished grooves NOx escape, causing serious environmental pollution and operatives of bodily harm, while expensive chemical raw material costs and other factors have hampered the process of promotion.
aluminium tape suppliers
Throughout the three processes, although with different characteristics, but the disadvantages are also prominent, such as high alkaline etching aluminum consumption, more caustic, low efficiency; etching fluoride pollution, dark profiles; polishing pollution, high cost and so on. These processes are either polluted the environment, or a waste of resources to aluminum, either to reduce the aluminum surface quality, process improvement urgently.
aluminium plates suppliers
Etching process：Etching by a degreasing → washing → → washing → washing → alkaline etching → rinsing → rinsing → light → washing → washing → oxidation composition. After the first etching profile degreasing, after alkaline etching, a light, complete pre-treatment. The core of the process is etching step, to mechanical pattern, sand, such as by etching decision. The biggest advantage is different from the alkaline etching, etching is going strong mechanical pattern, sand, low aluminum consumption, usually 3-5 minutes to complete, alkaline etching aluminum consumption is almost 1 / 8-1 / 6 from efficiency and resource conservation perspective, the etching is undoubtedly a big step forward alkaline etching process. However, environmental issues have become more prominent etching: contaminated with toxic gases escape HF acid bath and washing trough Fˉ of. Fluorides are generally highly toxic, processing more difficult. In addition, the etching process, profiles the appearance of dark black hair, despite the forced continuation of alkaline etching and the light brightens, but still very dark, not only increasing the process has lost its luster, these problems have not yet valid solution.
Polishing process：The degreasing → washing → polishing → washing → washing composition profiles by polishing into the groove after degreasing, 2-5 minutes after polishing, the mirror can be formed, after washing with water can be directly oxidized. The core of the process step is polishing, Wrinkle, mirror polishing is done in the groove. Polished aluminum consumption has a low profile bright advantages, but polished grooves NOx escape, causing serious environmental pollution and operatives of bodily harm, while expensive chemical raw material costs and other factors have hampered the process of promotion.
aluminium tape suppliers
Throughout the three processes, although with different characteristics, but the disadvantages are also prominent, such as high alkaline etching aluminum consumption, more caustic, low efficiency; etching fluoride pollution, dark profiles; polishing pollution, high cost and so on. These processes are either polluted the environment, or a waste of resources to aluminum, either to reduce the aluminum surface quality, process improvement urgently.
Aluminum production process，Leveling，bright
1. aluminum foil Category:
① according to the shape points, it can be divided into a roll of aluminum foil and a sheet of aluminum foil. Foil products delivery methods - like the vast majority of the volume, only a handful of users to use artisans packaging sheet of aluminum foil.
② Press thicknesses can be divided into thick foil, single zero foil, double zero foil three. Thick foil is a foil thickness 0.1-0.2㎜, single zero foil with a thickness of 0.01 mm and less than 0.1 mm foil, double zero foil, there are two zeros after the decimal point when the foil thickness mm for the units of measurement.
③ by state, major hard for the whole state of foil, foil soft state, semi-rigid foil state quarter and three-quarters of a hard foil hard foil.
④ Press the surface state can be divided into single-sided and double-sided foils foils.
⑤ according to zoning, divided foil packaging, household foil, electrical equipment and construction with foil with foil.
colored aluminum foil
2. Foil properties:
Thin and light, than strength, good gloss, high thermal and electrical conductivity, high moisture resistance, non-toxic, tasteless, good cover optical, thermal insulation, good corrosion resistance.
aluminum foil metal
3. aluminum and aluminum alloy grades and status:
In the past it is based on national unified representation that Pinyin plus a sequence number, since 1996, this representation has been disabled, is currently used in four-digit representation of the international system. Alloy uses a four-digit system of representation, wherein: the first representative of the alloy series, such as the first digit is 1, represents pure aluminum series, the first digit is 2-8, the representative of a the main alloying elements of different series of aluminum alloys. 1 Department represents aluminum, its last two digits indicate the minimum percentage amounts of aluminum in two after the decimal point. Indicates control of alloying elements or impurities limit the content of the second grade. Example: 1100 represents an aluminum content of 99.00%, 1235 represents aluminum content of 99.35%, 8011 Chemical composition: silicon content of 0.50 to 0.90, the iron content of 0.60 to 1.0, manganese copper content of 0.10 Mg 0.20 0.05 0.05 chromium content nickel content 0.10 Ti 0.08 Zn content, other content 0.05, total content of other 0.15, the balance aluminum content of 8011 (H14), mechanical properties: tensile strength: 125 to 165 yield strength: 110 elongation: 2 ~ 5.
4. The status of aluminum and aluminum alloys and code:
Baseline: F- free machining status, O- annealed condition, H- hardening state, W- solution heat treatment, T- heat treatment.
Subdivision Status: state foundation behind to pick 2-3 digits, the first digit is 1, 2 shows a basic processing program of the state, the basic state of the second digit indicates the degree of hardening products, digital 8 shows a hard state for state 8 between O (annealing) and H ×, should add a number from 1-7 indicates the alloy species and limit the use of aluminum foil, the main state O state respectively after H × code, H1 and H2 status state, other states rarely used.
① according to the shape points, it can be divided into a roll of aluminum foil and a sheet of aluminum foil. Foil products delivery methods - like the vast majority of the volume, only a handful of users to use artisans packaging sheet of aluminum foil.
② Press thicknesses can be divided into thick foil, single zero foil, double zero foil three. Thick foil is a foil thickness 0.1-0.2㎜, single zero foil with a thickness of 0.01 mm and less than 0.1 mm foil, double zero foil, there are two zeros after the decimal point when the foil thickness mm for the units of measurement.
③ by state, major hard for the whole state of foil, foil soft state, semi-rigid foil state quarter and three-quarters of a hard foil hard foil.
④ Press the surface state can be divided into single-sided and double-sided foils foils.
⑤ according to zoning, divided foil packaging, household foil, electrical equipment and construction with foil with foil.
colored aluminum foil
2. Foil properties:
Thin and light, than strength, good gloss, high thermal and electrical conductivity, high moisture resistance, non-toxic, tasteless, good cover optical, thermal insulation, good corrosion resistance.
aluminum foil metal
3. aluminum and aluminum alloy grades and status:
In the past it is based on national unified representation that Pinyin plus a sequence number, since 1996, this representation has been disabled, is currently used in four-digit representation of the international system. Alloy uses a four-digit system of representation, wherein: the first representative of the alloy series, such as the first digit is 1, represents pure aluminum series, the first digit is 2-8, the representative of a the main alloying elements of different series of aluminum alloys. 1 Department represents aluminum, its last two digits indicate the minimum percentage amounts of aluminum in two after the decimal point. Indicates control of alloying elements or impurities limit the content of the second grade. Example: 1100 represents an aluminum content of 99.00%, 1235 represents aluminum content of 99.35%, 8011 Chemical composition: silicon content of 0.50 to 0.90, the iron content of 0.60 to 1.0, manganese copper content of 0.10 Mg 0.20 0.05 0.05 chromium content nickel content 0.10 Ti 0.08 Zn content, other content 0.05, total content of other 0.15, the balance aluminum content of 8011 (H14), mechanical properties: tensile strength: 125 to 165 yield strength: 110 elongation: 2 ~ 5.
4. The status of aluminum and aluminum alloys and code:
Baseline: F- free machining status, O- annealed condition, H- hardening state, W- solution heat treatment, T- heat treatment.
Subdivision Status: state foundation behind to pick 2-3 digits, the first digit is 1, 2 shows a basic processing program of the state, the basic state of the second digit indicates the degree of hardening products, digital 8 shows a hard state for state 8 between O (annealing) and H ×, should add a number from 1-7 indicates the alloy species and limit the use of aluminum foil, the main state O state respectively after H × code, H1 and H2 status state, other states rarely used.
1-8 series aluminum sheet price
1-8 series aluminum sheet price
1-8 series aluminum sheet price
Temper ：O,H14,H24,H28,H32,H34,H111,H112
Tensile strength :190 Mpa
Strength :140 Mpa
Elongation :22%
Hardness :60 HB
Denseness:2.69 g/cm
Welding capacity :nice
Cutability :nice
Anti-corrosiongood
Conductance :50- 63% IACS
Alloy :3003,2011 2024 5083, 5082,5052, 5005, 6061, 6062, 6082,1050, 1060, 1070, 1235, etc
Temper :O-H116, T2-T6.
Thickness :Light Gauge(0.15mm-2.0mm), Middle Gauge(2.0mm-6.0mm), Thick Plate(6.0mm-200mm)
WidthMax. 2400mm
Length :As required
Sheets Tensile strength and Elongation :offer by customer
Product Pictures of 1-8 series aluminum sheet
1-8 series aluminum sheet price
Temper ：O,H14,H24,H28,H32,H34,H111,H112
Tensile strength :190 Mpa
Strength :140 Mpa
Elongation :22%
Hardness :60 HB
Denseness:2.69 g/cm
Welding capacity :nice
Cutability :nice
Anti-corrosiongood
Conductance :50- 63% IACS
Alloy :3003,2011 2024 5083, 5082,5052, 5005, 6061, 6062, 6082,1050, 1060, 1070, 1235, etc
Temper :O-H116, T2-T6.
Thickness :Light Gauge(0.15mm-2.0mm), Middle Gauge(2.0mm-6.0mm), Thick Plate(6.0mm-200mm)
WidthMax. 2400mm
Length :As required
Sheets Tensile strength and Elongation :offer by customer
Product Pictures of 1-8 series aluminum sheet
Monday, 23 May 2016
The truth about aluminum foil
1. aluminum foil Category:
① according to the shape points, it can be divided into a roll of aluminum foil and a sheet of aluminum foil. Foil products delivery methods - like the vast majority of the volume, only a handful of users to use artisans packaging sheet of aluminum foil.
② Press thicknesses can be divided into thick foil, single zero foil, double zero foil three. Thick foil is a foil thickness 0.1-0.2㎜, single zero foil with a thickness of 0.01 mm and less than 0.1 mm foil, double zero foil, there are two zeros after the decimal point when the foil thickness mm for the units of measurement.
③ by state, major hard for the whole state of foil, foil soft state, semi-rigid foil state quarter and three-quarters of a hard foil hard foil.
④ Press the surface state can be divided into single-sided and double-sided foils foils.
⑤ according to zoning, divided foil packaging, household foil, electrical equipment and construction with foil with foil.
colored aluminum foil
2. Foil properties:
Thin and light, than strength, good gloss, high thermal and electrical conductivity, high moisture resistance, non-toxic, tasteless, good cover optical, thermal insulation, good corrosion resistance.
aluminum foil metal
3. aluminum and aluminum alloy grades and status:
In the past it is based on national unified representation that Pinyin plus a sequence number, since 1996, this representation has been disabled, is currently used in four-digit representation of the international system. Alloy uses a four-digit system of representation, wherein: the first representative of the alloy series, such as the first digit is 1, represents pure aluminum series, the first digit is 2-8, the representative of a the main alloying elements of different series of aluminum alloys. 1 Department represents aluminum, its last two digits indicate the minimum percentage amounts of aluminum in two after the decimal point. Indicates control of alloying elements or impurities limit the content of the second grade. Example: 1100 represents an aluminum content of 99.00%, 1235 represents aluminum content of 99.35%, 8011 Chemical composition: silicon content of 0.50 to 0.90, the iron content of 0.60 to 1.0, manganese copper content of 0.10 Mg 0.20 0.05 0.05 chromium content nickel content 0.10 Ti 0.08 Zn content, other content 0.05, total content of other 0.15, the balance aluminum content of 8011 (H14), mechanical properties: tensile strength: 125 to 165 yield strength: 110 elongation: 2 ~ 5.
4. The status of aluminum and aluminum alloys and code:
Baseline: F- free machining status, O- annealed condition, H- hardening state, W- solution heat treatment, T- heat treatment.
Subdivision Status: state foundation behind to pick 2-3 digits, the first digit is 1, 2 shows a basic processing program of the state, the basic state of the second digit indicates the degree of hardening products, digital 8 shows a hard state for state 8 between O (annealing) and H ×, should add a number from 1-7 indicates the alloy species and limit the use of aluminum foil, the main state O state respectively after H × code, H1 and H2 status state, other states rarely used.
① according to the shape points, it can be divided into a roll of aluminum foil and a sheet of aluminum foil. Foil products delivery methods - like the vast majority of the volume, only a handful of users to use artisans packaging sheet of aluminum foil.
② Press thicknesses can be divided into thick foil, single zero foil, double zero foil three. Thick foil is a foil thickness 0.1-0.2㎜, single zero foil with a thickness of 0.01 mm and less than 0.1 mm foil, double zero foil, there are two zeros after the decimal point when the foil thickness mm for the units of measurement.
③ by state, major hard for the whole state of foil, foil soft state, semi-rigid foil state quarter and three-quarters of a hard foil hard foil.
④ Press the surface state can be divided into single-sided and double-sided foils foils.
⑤ according to zoning, divided foil packaging, household foil, electrical equipment and construction with foil with foil.
colored aluminum foil
2. Foil properties:
Thin and light, than strength, good gloss, high thermal and electrical conductivity, high moisture resistance, non-toxic, tasteless, good cover optical, thermal insulation, good corrosion resistance.
aluminum foil metal
3. aluminum and aluminum alloy grades and status:
In the past it is based on national unified representation that Pinyin plus a sequence number, since 1996, this representation has been disabled, is currently used in four-digit representation of the international system. Alloy uses a four-digit system of representation, wherein: the first representative of the alloy series, such as the first digit is 1, represents pure aluminum series, the first digit is 2-8, the representative of a the main alloying elements of different series of aluminum alloys. 1 Department represents aluminum, its last two digits indicate the minimum percentage amounts of aluminum in two after the decimal point. Indicates control of alloying elements or impurities limit the content of the second grade. Example: 1100 represents an aluminum content of 99.00%, 1235 represents aluminum content of 99.35%, 8011 Chemical composition: silicon content of 0.50 to 0.90, the iron content of 0.60 to 1.0, manganese copper content of 0.10 Mg 0.20 0.05 0.05 chromium content nickel content 0.10 Ti 0.08 Zn content, other content 0.05, total content of other 0.15, the balance aluminum content of 8011 (H14), mechanical properties: tensile strength: 125 to 165 yield strength: 110 elongation: 2 ~ 5.
4. The status of aluminum and aluminum alloys and code:
Baseline: F- free machining status, O- annealed condition, H- hardening state, W- solution heat treatment, T- heat treatment.
Subdivision Status: state foundation behind to pick 2-3 digits, the first digit is 1, 2 shows a basic processing program of the state, the basic state of the second digit indicates the degree of hardening products, digital 8 shows a hard state for state 8 between O (annealing) and H ×, should add a number from 1-7 indicates the alloy species and limit the use of aluminum foil, the main state O state respectively after H × code, H1 and H2 status state, other states rarely used.
HAOMEI Aluminum Sale Manager Visit To Colombia
On May 12, 2016, our aluminium products sales manager to visit the customer in Colombia .
The thickness of the aluminum
People in their daily consumption process, will have such a concept of consumption: the higher the price the better goods, better number, the better the material, because the more abundant materials, the corresponding price will be higher, the quality is naturally more it is good. Do you think so? Today, I am afraid that after reading this article, to subvert your ideas.(aluminum tread plate)
Well, is not in accordance with this rule can be defined for any product it in the purchase of aluminum alloy products, aluminum prices are mainly based on the thickness of the wall thickness of the decision, but consumers often there is a misunderstanding:? Profile wall thickness the thicker the better? In fact not the case.(tread aluminium plate)
Many consumers in the purchase of aluminum doors and windows, will be granted that, aluminum wall thickness thicker than the national standard, product quality, the better, in fact not the case.
Aluminum wall thickness is the national standard. According to GB / T5237 "Aluminum Profiles" provides, in addition to the need for flexibility assemble profiles layering, gland, pinch, etc., architectural aluminum minimum nominal wall thickness of not less than 1.20mm, wherein the solid profile wall thickness tolerance 0.15 mm, wall thickness that is not less than 1.05mm; enclosed cavity containing a hollow profile parts of the wall thickness tolerance 0.23mm, that is, the wall thickness not less than 0.97mm.(buy aluminum tread plate)
According aluminum manufacturer's technical personnel, the national standard product wall thickness is the standard guarantee product safety and performance, in accordance with the requirements of environmental protection and energy-saving settings, not the thicker the wall thickness of the product, the better the quality of products.(aluminum tread plate sale)
Because the profile wall thickness is too thick, and can not guarantee air tightness, water tightness is good, the product quality is high, on the contrary will bring excessive waste of resources. Too thick and product supplies more than meet the national standard products, will bring high prices, giving consumers an unnecessary financial burden. Therefore, in line with national standards for aluminum products can be called a good product.
Well, is not in accordance with this rule can be defined for any product it in the purchase of aluminum alloy products, aluminum prices are mainly based on the thickness of the wall thickness of the decision, but consumers often there is a misunderstanding:? Profile wall thickness the thicker the better? In fact not the case.(tread aluminium plate)
Many consumers in the purchase of aluminum doors and windows, will be granted that, aluminum wall thickness thicker than the national standard, product quality, the better, in fact not the case.
Aluminum wall thickness is the national standard. According to GB / T5237 "Aluminum Profiles" provides, in addition to the need for flexibility assemble profiles layering, gland, pinch, etc., architectural aluminum minimum nominal wall thickness of not less than 1.20mm, wherein the solid profile wall thickness tolerance 0.15 mm, wall thickness that is not less than 1.05mm; enclosed cavity containing a hollow profile parts of the wall thickness tolerance 0.23mm, that is, the wall thickness not less than 0.97mm.(buy aluminum tread plate)
According aluminum manufacturer's technical personnel, the national standard product wall thickness is the standard guarantee product safety and performance, in accordance with the requirements of environmental protection and energy-saving settings, not the thicker the wall thickness of the product, the better the quality of products.(aluminum tread plate sale)
Because the profile wall thickness is too thick, and can not guarantee air tightness, water tightness is good, the product quality is high, on the contrary will bring excessive waste of resources. Too thick and product supplies more than meet the national standard products, will bring high prices, giving consumers an unnecessary financial burden. Therefore, in line with national standards for aluminum products can be called a good product.
Subscribe to:
Posts (Atom)